Cycling Gear Ratio & Speed
Chainring teeth — Presets
Rear cog teeth — Presets
Tire preset and circumference
Pressure only converts your PSI input to bar; it is not an inflation recommendation. Follow tire and rim compatibility and marked pressure limits. Empty input starts at 0. Preset circumference is approximate; measure loaded rollout for accuracy.
Results
Theoretical speed
50T × 15T (3.33) · 90 RPM
Gear ratio
3.33
Distance per crank turn
7.12 m
60 rpm
25.6
75 rpm
32.0
85 rpm
36.3
90 rpm
38.4
100 rpm
42.7
110 rpm
47.0
Measured front pressure
0 PSI
0.00 bar
Measured rear pressure
0 PSI
0.00 bar
Theoretical speed
Gear ratio = Chainring teeth / Rear cog teeth; Distance per crank turn (m) = Gear ratio × mm / 1000; Theoretical speed (km/h) = m × RPM × 60 / 1000.
Measured front pressure
Gear inches = Gear ratio × mm / (π × 25.4); bar = PSI × 0.0689475729.
Pressure only converts your PSI input to bar; it is not an inflation recommendation. Follow tire and rim compatibility and marked pressure limits. Empty input starts at 0. Preset circumference is approximate; measure loaded rollout for accuracy.
Method & limitations
Gear ratio = Chainring teeth / Rear cog teeth; Distance per crank turn (m) = Gear ratio × mm / 1000; Theoretical speed (km/h) = m × RPM × 60 / 1000. Gear inches = Gear ratio × mm / (π × 25.4); bar = PSI × 0.0689475729.
FAQ
- Gear ratio
- Gear ratio = Chainring teeth / Rear cog teeth; Distance per crank turn (m) = Gear ratio × mm / 1000; Theoretical speed (km/h) = m × RPM × 60 / 1000.
- Measured front pressure
- Pressure only converts your PSI input to bar; it is not an inflation recommendation. Follow tire and rim compatibility and marked pressure limits. Empty input starts at 0. Preset circumference is approximate; measure loaded rollout for accuracy.
Last checked: 2026-10-31